XTR Powder Painted PEI Flexi Plate - 258 x 258 - Bambu Lab X1, X1 Carbon (or X1C), X1E, P1P, and P1PS
Size: 258 x 258 mm / 10.15" x 10.15"
*Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS
*May fit: Two Trees SK1 (exact fit but without alignment tab)
We start with our thicker (0.6 mm) XTR, high-chromium spring steel Flexi Plates, powder paint them with Ultem brand PEI coating and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base, not included.
Works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use.
To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.
*If your sticker is not being recognized on the X1 series, please update with the latest firmware.
**Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes.
***It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.
Great finish. Great adhesion.
I wipe down with IPA and spray it with Aquanet hair spay and it is dead nuts reliable for all my prints.
I've been printing on the plate for the past 30 days and I couldnt be happier! Prints stick well during the print, then a simple flex of the plate and they pop right off. So much easier to use than standard plates.
The Wham Bam plate performs very well and provides the build surface that I wanted from the start with my Bambu X1 Carbon. This makes my 3D printing a far more enjoyable operation.
This has to be the best plate I own by far. It's the only one I use and I love the texture it leaves on my prints.