Skip to product information
1 of 9

315 x 215 Kit with Pre-Installed PEX Build Surface - E3D ToolChanger

Regular price $86.00 USD
Sale price $86.00 USD Regular price
Sale Sold out
Shipping calculated at checkout.

Description

Size: 315 x 215 mm / 12.4” x 8.5”

Fits: E3D ToolChanger

The Pre-Installed Flexible Build System includes:

  • 1  Wham Bam Flexi Magnetic Base (high temp-resistant up to 150 degrees with high temp 3M adhesive)
  • 1  Wham Bam Flexi Build Plate (spring steel) with pre-installed Wham Bam Custom Formulated PEX Build Surface
  • 1 Steel Wool 000 (for prepping your PEX Build Surface)

The Pre-Installed Double Wham includes:

  • 1  Wham Bam Flexi Magnetic Base (high temp-resistant up to 150 degrees with high temp 3M adhesive)
  • 2  Wham Bam Flexi Build Plate (spring steel) with pre-installed Wham Bam Custom Formulated PEX Build Surface
  • 1 Steel Wool 000 (for prepping your PEX Build Surface)

    For more information on this product, click here: Flexible Build System

    View the full chart of filament settings on PEX

    *Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume, and see if you are happy with the size before ordering. Please keep in mind that on one side you will have 2 tabs that stick out another 15mm. Wham Bam is not responsible for mistaken order sizes

    **It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Dan Rimer
    This is a game-changer for my E3D toolchanger

    Since building my tool changer, I've either had PETG warping and coming off the bed or sticking so well that it actually breaks the glass bed. On a couple of occasions, I've actually had both...

    That was before installing the Wham Bam Flexiplate base and PEX spring plate. I found that the best option was to install the base on top of a glass bed and cut out a little bit of the magnetic layer to allow the swiss clips to hold the base to the bed of the printer (with the glass in between). The means that the magnetic base *can* be removed, for example if I want to print something really hot, like Polycarbonate. The glass sheet makes the assembly take longer overall to heat up (even though the bed claims to be at 70C, it takes another 3-5minutes for the build plate to reach this temperature).

    The PEX sheet gives the prints a perfect, shiny bottom layer, resulting in aesthetically pleasing prints.

    Thank you, Wham Bam, for making my tool changer great again!

    I
    Ingrid Florentin

    Nice WhamBam bed