Skip to product information
1 of 6

140 x 80 - AnyCubic Photon D2 DLP

Regular price $32.00 USD
Sale price $32.00 USD Regular price $36.00 USD
Sale Sold out
Shipping calculated at checkout.
In stock (71 units), ready to be shipped

Description

fits: AnyCubic Photon D2 DLP

Size: 140 x 80 mm

Continuous printing with a Double Wham, start another print before you start cleaning the first! The Double Wham contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resin, mean green, and isopropyl alcohol
  • 2  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

The Flexible Build System contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resin, mean green, and isopropyl alcohol
  • 1  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

For more information on this product, click here: Flexible Build System for Resin

*Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes

**It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
0%
(0)
0%
(0)
20%
(1)
A
Anthony Chu
Magnetic sheet adhesive failed on 3rd print

The flex plate fit great and was very useful. But the adhesive on the magnetic sheet failed when I pulled the flex plate from the plate, making the whole thing useless.

Also the tab on the flex sheet is sharp and cut through my glove and into my thumb when I was trying to remove it.

C
Carlos Farias

140 x 80 - AnyCubic Photon D2 DLP

K
KRISTOFER RECZYNSKI
The Essential Accessory for All 3D Printers

Very impressed with this product. Started 3D printing 6 months ago. Initially, I didn't think I'd need something like this. After using one for a few months now, cleanup is much faster, and downtime between prints has been reduced to almost zero. Especially useful for delicate prints that would break or be damaged during removal with a scraper. Only downside I'd say is that the instructions are very unclear on what is needed to install the "spacer". Had to do some research/troubleshooting online, and found a reddit thread which helped me find a solution, as my Anycubic D2 would not calibrate properly after installation of the magnet. Turns out, you need to print a spacer that's the same height as the magnet, which offsets the added build plate height, in order to calibrate your printer properly. The file to print the spacer, and installation instructions for the spacer were not included. The installation page vaguely referred to this necessary piece, but it was very unclear as to what needed to be done/printed/installed prior to using the flexplate. Visual instructions and a link to the required spacer file are a must. Maybe even include the spacer with the product itself, as it costs about 1 cent worth of material to make yourself. Other than that hiccup, this is a 10/10 must-have accessory.

M
Martin NIeuwoudt

140 x 80 - AnyCubic Photon D2 DLP

W
Warren
Works great

I'm happy it makes getting prints off easier