Resin HotBox - Resin Printer Enclosure
Couldn't load pickup availability
Product Details
(Please see full printer list below on the 'Fits' collapsible)
The Resin HotBox® is a lightweight, easy to assemble 3D printer enclosure created for users of resin printers to get more consistent results and fewer failures with a better controlled ambient temperature. Almost every resin prints better at specific temperature ranges, especially the higher-performance and exotic resins.
See the Resin HotBox® in action, check out our HotBox® YouTube Playlist .
The Resin HotBox® is made of high-grade Nylon 600D fabric with fire-resistant coating and lined with a metallic heat-deflecting internal liner that sandwiches around a strong, lightweight honeycomb insulating structure. The front panel has a large clear window for maximum visibility that easily lifts up and is secured by velcro for full access to your printer.
Take a look at the entire Resin HotBox® line including accessories.
Features include:
- Lightweight semi-rigid construction
- Excellent insulating properties
- Folds up flat, is easy to store and transport
- Front USB outlet and extension cable
- Cable passage for power or other cables
- Full view front window covered with an anti-UV film to allow viewing the print
- Built-in thermometer (two LR44 batteries not included)
- Passage with cover for user-added fume extraction and air filtering
- A set of loops to hold an anti-UV LED light bar
- Built-in top handle to lift the enclosure when needed
- Anycubic Photon
- Anycubic Photon 4K
- Anycubic Photon D2 DLP
- Anycubic Photon M3
- Anycubic Photon Mono
- Anycubic Photon Mono 2 (tight fit or upgrade to the Resin HotBox Mega )
- Anycubic Photon Mono SE
- Anycubic Photon Mono X ( bypass lid sensor)
- Anycubic Photon S
- Anycubic Photon SQ
- Anycubic Photon Ultra
- Anycubic Photon X 6K
- Creality Halot
- Creality Halot LD-002 H
- Creality Halot LD-002 R
- Creality Halot LD-006
- Creality Halot One
- Creality Halot One Plus
- Creality Halot One Pro
- Elegoo Mars
- Elegoo Mars 3
- Elegoo Mars 3 Pro
- Elegoo Mars 3 Ultra 4K
- Elegoo Mars C
- Elegoo Mars Pro V2
- Elegoo Saturn
- Elegoo Saturn 2 8K (tight fit or upgrade to the Resin HotBox Mega )
- Elegoo Saturn 3 (tight fit or upgrade to the Resin HotBox Mega )
- Elegoo Saturn 3 Ultra (tight fit or upgrade to the Resin HotBox Mega )
- Elegoo Saturn 8K (tight fit or upgrade to the Resin HotBox Mega )
- EPAX 3D E10, E10 4K, E10 4K 8.9 & E10 8K 10.1
- EPAX 3D E6 6” 2K
- Flashforge Foto 9.25
- Longer Orange 30 & 4K
- Phrozen Sonic Mighty 4K
- Phrozen Sonic Mini, Mini 4K & Mini 8K
- Uniz IBEE
- Voxelab Polaris 2K
- Voxelab Proxima 6.0 2K, 6.0 2K & 8.9 4K
Designed to fit most small and medium resin 3D printers and may fit printers not listed above in our confirmed list. Please check the measurements against your printer.
Do you have a printer compatible with our Resin HotBox®? Please inform us if your printer fits but is not on our confirmed list. We’d love to hear about it, and you might even receive a discount on Wham Bam® merchandise for your efforts. Click here for more info.
- 1 Resin HotBox®
- 1 USB Port Extender
- External - 330 mm x 330 mm x 580 mm
- Product weight - 2 kg, 4.4 lbs
- Brighten your HotBox®! This HotBox® has a loop to add one Resin LED lights inside.
- Protect your home and workspace from fire with the Cloud® - Personal Printer Sentry.
Video Install of the Resin HotBox®
Download our Resin HotBox® instructions.
- Unpack all components from the enclosure’s box, ensuring all parts are included.
- Remove your Resin HotBox® from its packaging, unfold, and lay flat with the metallic side upward.
- Locate the small rectangular rear of the thermometer. Push the cover in the direction of the arrow and swing it upward. You will need to purchase 2 LR44 Batteries (also listed as A76 or 357) and Insert 2 LR44 batteries with the + side up (large smooth side). Push each down so it clicks in. Now swing down the cover and slide it in the other direction to close.
- Locate your USB extender and remove from its packaging. Unscrew the backing nut that is already on the USB extender by turning it counter clockwise. With the backing nut off, insert the cable through the hole from outside to inside. Put the backing nut on the cable and screw it to the USB extender main body until it has tightened and sandwiched itself onto the front panel of the Resin HotBox®.
To see the HotBox® in action, please check out our HotBox® YouTube Playlist.
